As China's first PP hollow sheet provides equipment manufacturers, the company's success to the new spring home and abroad clients shipped more than 50 hollow plate line. We developed a new type of shape the system can ensure faster production speeds and higher plate surface quality. Another special designed screw and metering pump to yield more stable, even adding a lot of recycled materials can guarantee stable production and high product quality, sheet maximum width is 2100mm, thickness 2mm-10mm.
Product Features:
1 Extruder: screw of special design, advanced temperature control system to ensure good plastics and rubber extrusion of high yield and stability.
2 Changer: use hydraulic quick changer, so that the process of changing network quickly and efficiently, duplex and special sealing structure, stable operation of the changer.
3 Mold: mold made of high quality alloy steel with high activity of the throttling device, so that material flow in the die pressure points uniform, the upper and lower die of the differential regulation, to ensure uniform thickness from top to bottom.
4 Vacuum shaping table: setting the system up with rapid heat exchange cooling system and vacuum system with an effective staggered, sequential distribution of such distribution to ensure the accuracy of stereotypes. Vacuum system consists of two independent subsystems, each subsystem equipped with a fixed number of three-loop vacuum lines, each with a fixed cycle are co-vacuum and vacuum control system display system, thus making the surface of the vacuum plate uniform and stable.
5 Tractor: tractor distribution of the first and second groups, the first set of traction for high-power, high reduction ratio, multi-roll style, its low speed performance, traction, even in the plate can be synchronized from the vacuum forming Taichung pull. Tractor for the second group to deal with stress. Comes with a cutting-edge devices to ensure the quality of sheet metal edge.
6 Stress Elimination: advanced large area conductive heating, the plate effectively eliminate stress, and further improve sheet flatness.
7 Cutting Machine: with the exact moment and Cutting and automatic lift discharge, special wear-resistant alloy blade knife, a plate section to ensure quality.
8 Full line electrical control: we not only can the entire line of traditional automation control panel, also on microcomputer (PLC) and the entire line can be achieved using all the parameters (such as: screw speed, temperature, pressure, yield, etc.) unified control, and thus the effective functioning of the entire line optimization features. An Fusheng hollow board production equipment, using different screw design and machine configuration, can produce various specifications of PC, PP hollow board, can produce the maximum width of 2300mm, thickness from 2mm-12mm. This product is widely used in advertising, decoration, insulation, packaging and other purposes, and because of PP hollow board with light weight, high strength, moisture, corrosion, etc., have been gradually replaced by cardboard boxes, as do the packing material of choice.
Technical Specifications:
| Screw diameter |
120mm |
| Screw L/D ratio |
35:1 |
| Extruder drive |
132kw |
| Thickness of sheet |
2-10mm |
| Width of sheet |
1220-2100mm |
| Max.output |
150-250kg/h |
| Power installed |
150kw |
Application:
Widely used in highway and flyovers noise barriers, airports, the exhibition, park plaza backdrop, a telephone booth, stop, billboards, etc
